In home decoration, we usually do not lay a certain kind of floor or floor tiles. Considering factors such as convenient cleaning, space division, and beautiful decoration, we usually use floor tiles and wooden floors to mix and match - such as entrance and living room. , living room and bedroom, living room and bathroom...
But the question also arises: How to connect the wooden floor and floor tiles?
In response to this problem, the editor has gained a lot of valuable closing experience from the plaster master, and I will share it with you one by one for your reference.
Direct splicing | The most test of construction level
Direct splicing is the most eye-catching way to close the seams, giving people a visually “seamless” aesthetic. This seamless connection with the wooden floor can make irregular changes, transitioning from ceramic tiles to the floor, just like an abstract painting. It can even achieve a gradient effect.
However, this splicing method tests the construction level the most, and the masonry master needs to solve the problem of height difference. The solution to the height difference needs to meet the following two prerequisites:
1. The quality of the floor must be excellent and have strong resistance to deformation.
2. Pre-construction calculations must be accurate. When laying floor tiles, a cement cushion is required, which is thicker than the floor, soWhen leveling, the height difference must be reserved to ensure that the floor tiles and the floor are on the same plane.
The problem of height difference is solved, and the remaining joints only need to be processed by gluing.
Flat strips | Simple construction and low cost
The flat strip closing is mainly done by flat strips to cover the gap between the floor and the floor tiles. This processing method generally uses T-shaped edge strips to ease the transition between the two materials. If there is a small height difference (within 5mm), a sloped edge strip can be used to connect it, which will not hinder walking.
Common materials include copper, wood, stainless steel, rubber strips, aluminum alloy, etc. Use copper strips to close the gap between the wooden floor and the floor tiles, and apply glass glue directly, which will not rust.
Generally speaking, this method is relatively simple to use, has low labor costs and has beautiful effects.
Threshold stone | It doesn’t look ugly once done
This processing method is generally suitable for the transition between living room floor tiles and bedroom wooden floors. Nowadays, there are many styles of threshold stones, and when done, they can become a landscape. Common ones can include marble threshold stones, mosaics, ceramic tile threshold stones, etc.
In addition, if it is difficult to achieve the same ground height between the two spaces, comprehensive adjustment of this difference will be labor-intensive and material-intensive. At this time, if you choose a threshold stone, you can correct the height difference by polishing it, which saves you a little trouble.
High and low buckles | Suitable for spaces with gaps
High-low buckles are similar to flat strips, but high-low buckles are suitable for floor plans with a slight gap between wooden floors and floor tiles, and can cleverly alleviate floor designs with height differences.
You can also calculate the elevation of the finished surface before laying the wooden floor and laying the floor tiles. The two are connected flatly, and an additional keel is installed under the flat joint. Then, where the floor and floor tiles meet, the floor should have an angle of 1-2mm. Then smooth it with clear silicone.
The above are the 4 connection methods between wooden floors and floor tiles shared by the masonry master. Each connection method has its own advantages and disadvantages. You can choose according to the actual situation of the space.
Sharing is to create value, but the copyright still belongs to the original author.
If there is any infringement, please contact us to delete it.
